Texas Instruments TMS320C6000 Reference Manual page 104

EDMA
Example
4.7.8
EDMA_DisableChannel
Function
Arguments
Return Value
Description
Example
4.7.9
EDMA_EnableChannel
Function
Arguments
Return Value
Description
Example
4-56
EDMA_ConfigB(hEdma,
0x41200000, /* opt */
0x80000000, /* src */
0x00000040, /* cnt */
0x80010000, /* dst */
0x00000004 /* idx */
0x00000000 /* rld */
);
Disables an EDMA channel
void EDMA_DisableChannel(
EDMA_HANDLE hEdma
);
Device handle, see EDMA_Open().
hEdma
none
Disables an EDMA channel by clearing the corresponding bit in the
EDMA event enable register. See also EDMA_EnableChannel().
This function accepts the following devices handles:
From EDMA_Open()
EDMA_DisableChannel(hEdma);
Enables an EDMA channel
void EDMA_EnableChannel(
EDMA_HANDLE hEdma
);
Device handle, see EDMA_Open().
hEdma
none
Enables an EDMA channel by setting the corresponding bit in the
EDMA event enable register. See also EDMA_DisableChannel().
When you open an EDMA channel it is disabled so you must enabled it
explicitly.
This function accepts the following devices handles:
From EDMA_Open()
EDMA_EnableChannel(hEdma);