GE -DSH-73 User Manual page 90

Chapter 5: Web-Based Management
Object
Tagged VID:
NOTE: Access Link:
Because the access port doesn't have an understanding of tagged frame, the column
field of Tagged VID is not available.
NOTE: Trunk Link
1. A trunk port doesn't insert tag into an untagged frame, and therefore the untagged
VID column field is not available.
2. It's not necessary to type '1' in the tagged VID. The trunk port will forward the
frames of VLAN 1.
3. The trunk port has to be connected to a trunk/hybrid port of the other switch. Both
the tagged VID of the two ports have to be the same.
NOTE: Hybrid Link
1. It's not necessary to type '1' in the tagged VID. The hybrid port will forward the
frames of VLAN 1.
2. The trunk port has to be connected to a trunk/hybrid port of the other switch. Both
the tagged VID of the two ports have to be the same.
• Pull down the selection item and focus on 802.1Q then press to set the VLAN
Operation Mode in 802.1Q mode
• You can see the link type, untagged VID, and tagged VID information of each port
in the table below on the screen.
86
Description
This column field is available when Link Type is set as Trunk Link and
Hybrid Link. Assign a number in the range between 1 an 4094.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual