Sntp Commands Set - GE -DSH-73 User Manual

Hide thumbs Also See for GE-DSH-73:
Table of Contents

Advertisement

SNTP Commands Set

Commands
sntp enable
sntp daylight
sntp daylight-period
[Start time] [End time]
sntp daylight-offset
[Minute]
sntp ip
[IP]
sntp timezone
[Timezone]
show sntp
show sntp timezone
no sntp
no sntp daylight
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Level
Description
G
Enable SNTP function
G
Enable daylight saving time,
if SNTP function is inactive,
this command can't be
applied.
G
Set period of daylight saving
time, if SNTP function is
inactive, this command can't
be applied.
Parameter format:
[yyyymmdd-hh:mm]
G
Set offset of daylight saving
time, if SNTP function is
inactive, this command can't
be applied.
G
Set SNTP server IP, if SNTP
function is inactive, this
command can't be applied.
G
Set timezone index, use
"show sntp timzezone"
command to get more
information of index number
P
Show SNTP information
P
Show index number of time
zone list
G
Disable SNTP function
G
Disable daylight saving time switch(config)#no sntp daylight
Chapter 6: Command Sets
Example
switch(config)#sntp enable
switch(config)#sntp daylight
switch(config)# sntp daylight-period
20060101-01:01 20060202-01:01
switch(config)#sntp daylight-offset 3
switch(config)#sntp ip 192.169.1.1
switch(config)#sntp timezone 22
switch#show sntp
switch#show sntp timezone
switch(config)#no sntp
159

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ge-dsh-82Ge-dsh-82-poe

Table of Contents