Client Entries - GE -DSH-73 User Manual

Chapter 5: Web-Based Management
This page includes the following fields:
Object
DHCP Server:
Low IP Address:
High IP Address:
Subnet Mask:
Gateway:
DNS:
Lease Time (sec):

Client Entries

When the DHCP server function is enabled, the system will collect the DHCP client
information including the assigned IP address, the MAC address of the client device,
the IP assigning type, status and lease time.
Figure 5-6: DHCP Client Entries interface
50
Description
Enable or Disable the DHCP Server function. Enable—the switch will be
the DHCP server on your local network.
Type in an IP address. Low IP address is the beginning of the dynamic
IP range. For example, dynamic IP is in the range between
192.168.0.101 ~ 192.168.0.200. In contrast,
address.
Type in an IP address. High IP address is the end of the dynamic IP
range. For example, dynamic IP is in the range between 192.168.0.101
~ 192.168.0.200. In contrast,
Type in the subnet mask of the IP configuration.
Type in the IP address of the gateway in your network.
Type in the Domain Name Server IP Address in your network.
It is the time period that system will reset the dynamic IP assignment to
ensure the dynamic IP will not been occupied for a long time or the
server doesn't know that the dynamic IP is idle.
192.168.0.101
192.168.0.200 is the High IP address.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
is the Low IP