GE -DSH-73 User Manual page 65

UTC Timezone:
SNTP Sever URL:
Switch Timer:
Daylight Saving Period:
Daylight Saving Offset
(mins):
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Universal Time, Coordinated. Set the switch location time zone. The
following table lists the different location time zone for your reference.
Set the SNTP server IP address. You can assign a local network time
server IP address or an internet time server IP address.
When the switch has successfully connected to the SNTP server whose
IP address was assigned in the column field of SNTP Server URL, the
current coordinated time is displayed here.
Set up the Daylight Saving beginning date/time and Daylight Saving
ending date/time. Please key in the value in the format of 'YYYYMMDD'
and 'HH:MM' (leave a space between 'YYYYMMDD' and 'HH:MM').
YYYYMMDD: an eight-digit year/month/day specification.
HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in '20070701 02:00' and '20071104 02:04' in the two
column fields respectively to represent that DST begins at 2:00 a.m. on
March 11, 2007 and ends at 2:00 a.m. on November 4, 2007.
For non-US and European countries, specify the amount of time for
day light savings. Please key in the valid figure in the range of minute
between 0 and 720, which means you can set the offset up to 12
hours.
Chapter 5: Web-Based Management
61