Table of Contents
Advertisement
This page includes the following fields:
Object
IEEE 802.1x Protocol:
Radius Server IP:
Server Port:
Accounting Port:
Shared Key:
NAS, Identifier:
Port Configuration
You can configure the 802.1x authentication state for each port. The state provides
Disable, Accept, Reject, and Authorize.
Figure 5-66: 802.1x Per Port Setting interface
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Description
Enable or disable 802.1x protocol.
Assign the RADIUS Server IP address.
Set the UDP destination port for authentication requests to the
specified RADIUS Server.
Set the UDP destination port for accounting requests to the
specified RADIUS Server.
Set an encryption key for using during authentication sessions with
the specified RADIUS server. This key must match the encryption
key used on the RADIUS Server.
Set the identifier for the RADIUS client.
Chapter 5: Web-Based Management
123
Advertisement
Table of Contents
