GE -DSH-73 User Manual page 45

CLI commands and descriptions
Modes Access Method
Begin a session
User EXEC
with your switch.
Enter the enable
Privileged
command while in
EXEC
User EXEC mode.
Enter the
configure
Global
command while in
Configuration
privileged EXEC
mode.
Enter the vlan
database
VLAN
command while in
database
privileged EXEC
mode.
Enter the interface
of fast Ethernet
command (with a
Interface
specific interface)
configuration
while in global
configuration
mode.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Prompt Exit Method
Enter logout or
switch>
quit.
Enter disable to
switch#
exit.
To exit to
switch privileged EXEC
(config)# mode, enter exit
or end
To exit to user
switch
EXEC mode,
(vlan)#
enter exit.
To exit to global
configuration
mode, enter exit.
switch
To exit to
(config-if)#
privileged EXEC
mode, enter exit
or end.
Chapter 4: Console Management
About This Model
The user commands
available at the user level
are a subset of those
available at the privileged
level.
Use this mode to:
• Perform basic tests.
• Display system
information.
The privileged command is
the advanced mode.
Use this mode to
• Display advanced
function status
• Save configuration
Use this mode to configure
those parameters that are
going to be applied to your
switch.
Use this mode to configure
VLAN-specific parameters.
Use this mode to configure
parameters for the switch
and Ethernet ports.
41