Power Over Ethernet (Ge-Dsh-82-Poe) - GE -DSH-73 User Manual

Power Over Ethernet (GE-DSH-82-PoE)

Providing up to 8 PoE, in-line power interface, the GE-DSH-82-PoE Industrial PoE
Switch can easily build a power central-controlled IP phone system, IP Camera
system, AP group for the enterprise. For instance, 8 camera / AP can be easily
installed around the corner in the company for surveillance demands or build a
wireless roaming environment in the office. Without the power-socket limitation, the
PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.
NOTE: PoE functionality requires the use of the recommended a power source.
This product is intended to be supplied by a UL Listed Direct Plug-In Power Unit
marked "Class 2" or "LPS" and output rated 48 VDC, 380 mA minimum.
Power over Ethernet Powered Device
3~5 watts
6~12 watts
10~12 watts
3~12 watts
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-
Ethernet end-devices to the central where UPS is installed for un-interrupt
power system and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC sockets.
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC
power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.
Chapter 5: Web-Based Management
131