Port-based Priority
Configure the priority level for each port. With the drop-down selection item of
Priority Type above being selected as Port-based, this control item will then be
available to set the queuing policy for each port.
Figure 5-50: QoS Configuration - Port-Based Priority
This page includes the following fields:
Object
Port x:
COS Configuration
QoS settings allow customization of packet priority in order to facilitate delivery of
data traffic that might be affected by latency problems. When CoS / 802.1p Tag
Priority is applied, the Switch recognizes 802.1Q VLAN tag packets and extracts the
VLAN tagged packets with User Priority value.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Description
Each port has 4 priority levels—High, Middle, Low, and Lowest—to
be chosen.
Chapter 5: Web-Based Management
107