802.1X Commands Set - GE -DSH-73 User Manual

Chapter 6: Command Sets

802.1x Commands Set

Commands
8021x enable
8021x system radiusip
[IP address]
8021x system serverport
[port ID]
8021x system
accountport
[port ID]
8021x system sharedkey
[ID]
8021x system nasid
[words]
8021x misc quietperiod
[sec.]
8021x misc txperiod
[sec.]
8021x misc supptimeout
[sec.]
154
Level Description
G Use the 802.1x global
configuration command to
enable 802.1x protocols.
G Use the 802.1x system
radius IP global
configuration command to
change the radius server IP.
G Use the 802.1x system
server port global
configuration command to
change the radius server
port
G Use the 802.1x system
account port global
configuration command to
change the accounting port
G Use the 802.1x system share
key global configuration
command to change the
shared key value.
G Use the 802.1x system nasid
global configuration
command to change the
NAS ID
G Use the 802.1x misc quiet
period global configuration
command to specify the
quiet period value of the
switch.
G Use the 802.1x misc TX
period global configuration
command to set the TX
period.
G Use the 802.1x misc supp
timeout global configuration
command to set the
supplicant timeout.
Example
switch(config)# 8021x enable
switch(config)# 8021x system radiusip
192.168.1.1
switch(config)# 8021x system
serverport 1812
switch(config)# 8021x system
accountport 1813
switch(config)# 8021x system
sharedkey 123456
switch(config)# 8021x system nasid
test1
switch(config)# 8021x misc
quietperiod 10
switch(config)# 8021x misc txperiod 5
switch(config)# 8021x misc
supptimeout 20
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual