Table of Contents
Advertisement
Chapter 5: Web-Based Management
System Configuration
Figure 5-43: SNMP System Configuration interface
This page includes the following fields:
Object
Community Strings:
Agent Mode:
Trap Configuration
A trap manager is a management station that receives the trap messages generated
by the switch. If no trap manager is defined, no traps will be issued. To define a
management station as a trap manager, assign an IP address, enter the SNMP
community strings, and select the SNMP trap version.
100
Description
Here you can define the new community string set and remove the
unwanted community string.
String: Fill the name string.
RO: Read only. Enables requests accompanied by this community
string to display MIB-object information.
RW: Read/write. Enables requests accompanied by this community
string to display MIB-object information and to set MIB objects.
Click APPLY.
To remove the community string, select the community string that
you defined before and click REMOVE.
The strings of Public_RO and Private_RW are default strings. You
can remove them but after resetting the switch to default, the two
strings show up again.
Select the SNMP version that you want to use it. And then click
CHANGE to switch to the selected SNMP version mode.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Advertisement
Table of Contents
