GE -DSH-73 User Manual page 75

Figure 5-22: Static Trunking Group information
This page includes the following fields:
Object
Group Key:
Port Member:
• LACP enabled
Having set up the aggregator setting with LACP enabled, you will see the trunking
group information between two switches on the tab of Aggregator Information.
o Switch 1 configuration
1. Set System Priority of the trunk group. The default is 1.
2. Select a trunk group ID by pull down the drop-down menu bar.
3. Enable LACP.
4. Include the member ports by clicking the Add button after selecting the port
number and the column field of Work Ports changes automatically.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Description
This is a read-only column field that displays the trunk group ID.
This is a read-only column field that displays the members of this
static trunk group.
Chapter 5: Web-Based Management
71