Table of Contents
Advertisement
Chapter 5: Web-Based Management
Figure 5-33: VLAN-Port Based Edit/Delete interface
• Use DELETE to delete the VLAN.
• Use EDIT to modify group name, VLAN ID, or add/remove the members of the
existing VLAN group.
NOTE:
Remember to execute the "Save Configuration" action, otherwise the new
configuration will be lost when switch power off.
802.1Q VLAN
Virtual Local Area Network (VLAN) can be implemented on the Industrial Switch to
logically create different broadcast domain.
When the 802.1Q VLAN function is enabled, all ports on the switch belong to default
VLAN of VID 1, which means they logically are regarded as members of the same
broadcast domain. The valid VLAN ID is in the range of number between 1 and 4094.
The amount of VLAN groups is up to 256 including default VLAN that cannot be
deleted.
Each member port of 802.1Q is on either an Access Link (no VLAN-tagged) or a Trunk
Link (VLAN-tagged)[KK1]. All frames on an Access Link carry no VLAN identification.
Conversely, all frames on a Trunk Link are VLAN-tagged. Besides, there is the third
mode-Hybrid. A Hybrid Link can carry both VLAN-tagged frames and untagged
frames. A single port is supposed to belong to one VLAN group, except it is on a
Trunk/Hybrid Link.
The technique of 802.1Q tagging inserts a 4-byte tag, including VLAN ID of the
destination port-PVID, in the frame. With the combination of Access/Trunk/Hybrid
Links, the communication across switches also can make the packet sent through
tagged and untagged ports.
82
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Advertisement
Table of Contents
