User Authentication - GE -DSH-73 User Manual

Chapter 5: Web-Based Management
This page includes the following fields:
Object
IP Security Mode:
Enable HTTP Server:
Enable Telnet Server:
Security IP 1 ~ 10:
NOTE: Remember to execute the "Save Configuration" action, otherwise the new
configuration will be lost when the switch powers off.

User Authentication

Change web management login user name and password for the management
security issue.
Figure 5-17: User Authentication interface
64
Description
Having set this selection item in the Enable mode, the Enable HTTP
Server, Enable Telnet Server checkboxes and the ten security IP column
fields will then be available. If not, those items will appear in grey.
Having ticked this checkbox, the devices whose IP addresses match
any one of the ten IP addresses in the Security IP1 ~ IP10 table will be
given the permission to access this switch via HTTP service.
Having ticked this checkbox, the devices whose IP addresses match
any one of the ten IP addresses in the Security IP1 ~ IP10 table will be
given the permission to access this switch via telnet service.
The system allows the user to assign up to 10 specific IP addresses for
access security. Only these 10 IP addresses can access and manage
the switch through the HTTP/Telnet service once IP Security Mode is
enabled.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual