GE -DSH-73 User Manual page 35

Figure 2-20: LC fiber optical cable connects to the transceiver
• Remove the transceiver module
1. Make sure there is no network activity by consulting or checking with the network
administrator or through the management interface of the switch/converter (if
available) to disable the port in advance.
2. Remove the Fiber Optic Cable gently.
Figure 2-21: Pull out the SFP transceiver
3. Turn the handle of the MGB module horizontally.
4. Pull out the module gently through the handle.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Chapter 2: Installation
31