Table of Contents
Advertisement
Chapter 5: Web-Based Management
Figure 5-29: Rate Limiting interface
• All the ports support port ingress and egress rate control. For example, assume
port 1 is 10Mbps, users can set it's effective egress rate is 1Mbps, ingress rate is
500Kbps. The switch performs the ingress rate by packet counter to meet the
specified rate
o Ingress: Enter the port effective ingress rate (The default value is "0").
o Egress: Enter the port effective egress rate (The default value is "0").
• And then, click APPLY to apply the settings
Protocol
This section has the following items:
• VLAN
• Rapid Spanning Tree protocol
• SNMP
• QoS
• IGMP Snooping
76
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Advertisement
Table of Contents
