Product Specifications - GE -DSH-73 User Manual

Chapter 1: Introduction
• Security
o IEEE 802.1x Port-Based Authentication
o MAC address Filtering and MAC address Binding
o IP address security management to prevent unauthorized intruder
o Port Mirroring to monitor the incoming or outgoing traffic on a particular port
o Management
WEB-based, Telnet, Console Command Line management
Access through SNMP v1, v2c and v3 set and get requests
SNMP Trap / SMTP email for alarm notification of events
System Log Server / Client
Configuration backup / restore
E-mail event alert
TFTP firmware upgrade
Support LLDP to allow switch to advise its identification and capability on
the LAN

Product Specifications

Product
Hardware Specification
10/100Mbps Copper Ports
1000Mbps Copper Ports
SFP/mini-GBIC Slots
Switch Architecture
Switch Fabric
Switch Throughput
Address Table
6
GE-DSH-82 GE-DSH-82-PoE
8 10/ 100Base-TX RJ-
8 10/ 100Base-TX RJ-45
45 Auto-MDI/MDI-X
Auto-MDI/MDI-X ports
ports
2 10/100/1000Base-T 2 10/100/1000Base-T
RJ-45 ports RJ-45 ports
2 SFP interfaces,
2 SFP interfaces, shared
shared with Port-9
with Port-9 and Port-10
and Port-10
Store-and-Forward
5.6Gbps / non-
5.6Gbps / non-blocking
blocking
4.16Mpps @64Bytes 4.16Mpps @64Bytes
8K entries
GE-DSH-73
7 10/ 100Base-TX RJ-
45 Auto-MDI/MDI-X
ports
3 10/100/1000Base-T
RJ-45 ports
3 SFP interfaces,
shared with Port-7,
Port-9 and Port-10
7.4Gbps / non-
blocking
5.5Mpps@64bytes
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual