Adding Dishes; Program End - Hanseatic WQP12-7711D User Manual

Fully integrable dishwasher
Table of Contents

Advertisement

Available languages

Available languages

3. Keep the P button (3) held in until the next
program number appears in the display.
4. Then select the new program using the
P button and additional extra options as
previously described.
5. Close the dishwasher door. The newly
selected program will start after a few
seconds.

Adding dishes

You can add more dishes even if the dish-
washer program is already running.
In this case, the current dishwashing program
should only have been running for a short
time, as only then can the additional dishes
be cleaned.
CAUTION!
Risk of scalding!
If you open the dishwasher door during
operation, there is a risk that hot water
will spray out of it.
Maintain a safe distance from the ap-
pliance in order to avoid water/steam
which may escape.
Keep children and pets away from
the appliance.
1. Open the dishwasher door slightly and
wait until the spraying arm has come to
a standstill and the steam has dispersed.
When you open the dishwasher door,
the dishwasher program is automatically
paused.
2. Open the dishwasher door completely
and slowly.
3. Add the dishes.
4. Close the dishwasher door. The program
will continue to run.
A signal tone will sound while the dish-
washer program is paused.
Dishwasher operation

Program end

After the program has ended, an acoustic sig-
nal will sound lasting 8 seconds.
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
When opening the dishwasher door,
always use just the handle. Maintain
a safe distance from the appliance
in order to avoid water/steam which
may escape.
Keep children and pets away from
the appliance.
Trip hazard!
An open dishwasher door can easily be-
come a trip hazard.
Only leave the dishwasher door slight-
ly open after unloading.
1. Open the dishwasher door slightly and
wait until the steam has dispersed.
2. Switch the dishwasher off using the
-button (1). Turn the tap off.
3. Wait a little while before unloading the
dishwasher.
4. When unloading the dishwasher, start
with the lower rack and then unload the
upper rack. This will prevent water drip-
ping onto the lower layer of dishes from
the top layer of dishes.
5. Leave the dishwasher door open slightly
so that the inside of the dishwasher can
cool off and dry.
Page GB-19

Advertisement

Chapters

Table of Contents
loading

Table of Contents