Moving The Inverter; Manual Transport - Sungrow SG33CX User Manual

4 Mechanical Mounting
Type Tool
crimping tool

Other auxiliary tools that may be used

4.4 Moving the Inverter

Move the inverter to the specified position before installation. The inverter can
be moved manually or via a hoist.

4.4.1 Manual Transport

Lift and move the inverter to the destination by using the side handles and
bottom handles.
 Inappropriate moving operation may cause personal injury!
 It is recommended that at least two installers carry the inverter together
and wear protective equipment such as smash-proof shoes and gloves.
 Always beware of the gravity center of the inverter and avoid tipping.
The ground surface on which the inverter is to be placed should be
covered with a sponge pad, foam cushion or the like to prevent the
inverter bottom from scratches.
20
RJ45 crimping
tool
Wire stripper
User Manual
Hydraulic pliers