Mounting Steps - Sungrow SG33CX User Manual

User Manual
Spare parts
Item
Grub screw
Expansion bolts

4.6.2 Mounting Steps

Assemble the mounting-bracket by using the connecting bar.
Step 1
Level the assembled mounting-bracket by using the level, and mark the
Step 2
positions for drilling holes on the installation site.
Insert the expansion bolts into the holes and secure them with a rubber
Step 3
hammer. Fasten the nut with a wrench to expand the bolt. Remove the
nut, spring washer, and flat washer, and store them properly.
Fix the mounting-bracket with the expansion bolts.
Step 4
Quantity Specification
2
M4×10
2
M6×65
M10
4
(Recommended)
×
95
M4
1.5N.m
4 Mechanical Mounting
Source
Delivery scope
Delivery scope
Self-prepared
25