Sungrow SG33CX User Manual page 33

User Manual
Secure the mounting-bracket with bolts.
Step 3
Tab. 4-1 Fastening sequence
No. Components
A Mounting-bracket
B Full threaded bolt
C Metal bracket
D Flat washer
E Spring washer
F Hex nuts
Take out the inverter from the packing case.
Step 4
Hoist the inverter to the installation position when necessary (refer to
Step 5
4.4.2 Hoisting Transport). If the installation position is not high enough,
skip performing this step.
Hang the inverter to the mounting-bracket and ensure that the mounting
Step 6
ears perfectly engage with the mounting-bracket.
16mm
35N.m
Description
-
M10*45
-
-
-
M10
4 Mechanical Mounting
B
C
D
E
A
F
23