Sungrow SG33CX User Manual page 36

4 Mechanical Mounting
Tab. 4-2 Fastening sequence
Item Designation
A Wall
B Expansion bolt
C Mounting-bracket
Take out the inverter from the packing case.
Step 5
Hoist the inverter to the installation position when necessary (refer to
Step 6
4.4.2 Hoisting Transport). If the installation position is not high enough,
skip performing this step.
Hang the inverter to the mounting-bracket and ensure that the mounting
Step 7
ears perfectly engage with the mounting-bracket.
Fix the inverter with screws.
Step 8
26
Description
-
Fastening the bolt in the sequence of nut, spring
washer, slat washer
-
User Manual
A
16mm
35N.m
B
C