Deleting Stored Cue Or Loop Points; Using Hot Cues - PIONEER DJ XDJ-XZ Operating Instructions Manual

4 Press the [
Normal or loop playback starts from the point that was called up.

Deleting stored cue or loop points

1 Connect the USB device to this unit.
2 Load the track containing the cue points or loop points you want to
delete.
Stored cue and loop points are indicated by [ ] at the top of the waveform
display.
3 Press the [CUE/LOOP CALL
CALL (LOOP 2X)] button to call up the point to be deleted.
The track jumps to the called up point and pauses.
• When multiple points are stored, a different point is called up each time the
button is pressed.
4 Press the [DELETE] button.
The main unit display shows [
information is deleted.
• When a stored loop set as an active loop is deleted, the active loop is also
deleted.

Using Hot Cues

You can start playback instantly from the position where a Hot Cue is
set.
Up to 8 Hot Cue points can be set and saved for each track.
Part names and functions
(PLAY/PAUSE)] button.
DELETED], and the selected point
52
(LOOP 1/2X)] or [CUE/LOOP
En