Slip Loop; When Using Pad Mode (Beat Loop) - PIONEER DJ XDJ-XZ Operating Instructions Manual

Slip Loop

There are the following ways to use Slip Loop.
When using the [LOOP IN/CUE (IN ADJUST)] button or [LOOP
OUT (OUT ADJUST)] button
1 Press the [SLIP] button.
The unit enters Slip mode.
2 Press the [LOOP IN/CUE (IN ADJUST)] button, then press the
[LOOP OUT (OUT ADJUST)] button.
Loop playback starts.
Normal playback continues in the background during loop playback.
The [SLIP] button flashes in beat with the sound playing in the background.
• Loops of over 8 seconds can't be set.
• The same operation is performed by following procedures.
– Press the [4/8BEAT (LOOP CUTTER)] button.
– Press the [LOOP IN/CUE (IN ADJUST)] button for at least one second.
3 Press the [RELOOP/EXIT] button.
The loop is canceled and playback starts from the position reached in the
background.

When using PAD MODE (BEAT LOOP)

1 Press the [SLIP] button.
The unit enters Slip mode.
2 Press the [BEAT LOOP] button to switch to Beat Loop mode.
3 Press the Performance Pad corresponding to the number of beats
you want to set.
Loop is automatically set and loop playback starts. Normal playback continues
in the background during loop playback.
The [SLIP] button flashes in beat with the sound playing in the background.
Part names and functions
61
En