PIONEER DJ XDJ-XZ Operating Instructions Manual page 125

Adjusting the sound quality (page 97)
Setting ranges: MASTER OUT*/MASTER AND BOOTH OUT
• MASTER ATTENUATOR
Sets the master output attenuator level.
Setting ranges: -12 dB, -6 dB, 0 dB*
• BOOTH MONITOR ATTENUATOR
Sets the booth output attenuator level.
Setting ranges: -12 dB, -6 dB, 0 dB*
• PEAK LIMITER
Decreases sudden, unpleasant digital clipping of the master output.
Setting ranges: ON*/OFF
• MIC OUT TO BOOTH
Changes whether or not the microphone sound comes out from the
booth channel.
Setting ranges: ON*/OFF
• TALK OVER MODE
Switches Talkerover mode between [ADVANCED] and [NORMAL].
Setting ranges: ADVANCED*/NORMAL
• TALK OVER LEVEL
Sets the Talkover feature's sound attenuation level.
Setting ranges: -24 dB, -18 dB*, -12 dB, -6 dB
• HEADPHONES MONO SPLIT/STEREO
Switches the headphones output between [MONO SPLIT] and
[STEREO].
Monitoring with headphones (page 98)
Setting ranges: MONO SPLIT/STEREO*
• USB OUTPUT LEVEL
Sets the output level for PC REC.
Setting ranges: -19 dB*, -15 dB, -10 dB, -5 dB
• CH3 CONTROL TONE
Sets which device connected to the input terminal of PHONO/LINE
to send the time code signal for CH3.
125
En
Operation