Installing The Driver Software On Macos Mojave 10.14 - PIONEER DJ XDJ-XZ Operating Instructions Manual

Installing the driver software on macOS Mojave 10.14 /

macOS High Sierra 10.13
A new security feature has been added to macOS Mojave 10.14 /
macOS High Sierra 10.13.
When installing Pioneer DJ driver software on these versions of
macOS, driver software authentication is required.
If you're installing the driver software for the first time and you're
using macOS Mojave 10.14 / macOS High Sierra 10.13, you need
to follow the steps below. If the driver software was installed on
macOS or OS X before you updated to macOS Mojave 10.14 /
macOS High Sierra 10.13, you don't need to follow these steps.
1 Install Pioneer DJ's driver software in macOS Mojave 10.14 or
macOS High Sierra 10.13.
The following dialog box will appear during driver software installation.
2 Click [Open Security Preferences].
The [Security & Privacy] dialog box is displayed.
3 Check that [System software from developer "Pioneer DJ
Corporation" was blocked from loading.] appears at the bottom
of the screen.
This message will be displayed for 30 minutes after you start the installation of
the driver software.
Before you start
17
En