Using Loop Move
The playback position of the loop can be moved according to the length
of the selected beat (1 beat, 2 beats, 4 beats or 8 beats).
1 Press the [BEAT JUMP] button to switch to Beat Jump mode.
2 Set the loop.
3 Select the length of the beat and press a Performance Pad.
The playback position of the loop is moved according to the length of the
selected beat.
• If the track's BPM can't be detected, the BPM is set to 120.
• When the Quantize function is turned on, you might notice a slight delay due
to quantization.
Part names and functions
57
En