PIONEER DJ XDJ-XZ Operating Instructions Manual page 93

2 MIC TALK OVER button / indicator
The sound of channels other than the [MIC] channel is attenuated by -18 dB
(default) when a sound of -10 dB or greater is input to the microphone.
• You can change the level of attenuation for Talkover mode on the [UTILITY]
screen.
• Talkover mode can be switched between Normal mode and Advanced mode.
Read more: Changing the settings (page 119)
3 MIC LEVEL knobs
Adjusts the level of sound input to the [MIC] input terminals.
Read more: Using a microphone (page 99)
4 MIC EQ (HI, MID, LOW) knobs
Adjusts the sound quality of the microphones.
Read more: Using a microphone (page 99)
5 FEEDBACK REDUCER button
Detects the frequency when the microphone howling occurs, insert a filter that
removes only the detected frequency band. It can reduce howling while
minimizing damage to sound quality.
6 FEEDBACK REDUCER (LIGHT, HEAVY) switch
• [LIGHT]: Cuts the frequency band narrow by the filter. Select this to give
priority to sound quality such as vocal tracks and rap music.
• [HEAVY]: Cuts the frequency band wide by the filter. Select this to give
priority to howling reduction such as speech and MC.
7 HEADPHONES LEVEL knob
Adjusts the level of sound output from the [PHONES] output terminals.
Read more: Monitoring with headphones (page 98)
8 HEADPHONES MIX knob
Adjusts the balance of monitor sound level between the [MASTER] channel
and the channel for which the headphones [CUE] button is pressed.
Read more: Monitoring with headphones (page 98)
Part names and functions
93
En