Using Re-Trigger Loop; Using An Active Loop; Emergency Loop - PIONEER DJ XDJ-XZ Operating Instructions Manual

Using Re-trigger Loop

During loop playback, press the [LOOP IN/CUE (IN ADJUST)] button
while holding the [SHIFT] button.
Each time you press the button, the playback position returns to the
Loop In point and loop playback starts.

Using an active loop

1 Connect the USB device to this unit.
2 Load a track you set an active loop on rekordbox.
You can set a loop stored in rekordbox as an active loop.
The set active loop point is displayed in the waveform, as indicated by
shown below.
When the playback position reaches to the setting point, the loop is set
automatically and loop playback begins.

Emergency Loop

When a track can't be played any longer, a 4-beat loop is set
automatically to keep the sound going.
• The operation is restricted during emergency loop. To cancel
emergency loop, load the next track.
Part names and functions
1
50
En