Recording The Performance; Splitting A Track While Recording - PIONEER DJ XDJ-XZ Operating Instructions Manual

Recording the performance

You can record the sound from the [MASTER] output as a WAV file on
a USB device.
• The name of the files created when the sound is recorded is in the
format [REC***.WAV] (*** is a 3-digit number).
1 Connect the USB device to the USB2 slot.
2 Press the [MASTER REC (WAKE UP)] button.
Recording starts.
The [MASTER REC (WAKE UP)] button flashes.
• When the [MASTER REC (WAKE UP)] button is pressed again, the lighting
of the [MASTER REC (WAKE UP)] button turns off and recording stops.
• Approximately 90 minutes recording is possible with 1 GB USB device.

Splitting a track while recording

Press the [TRACK MARK] button while recording.
Recording track is split and stored on the USB device.
The file is divided right at the point where the [TRACK MARK] button
is pressed. From this point onwards, the sound can continue to be
recorded as a new file.
Part names and functions
31
En