Using The Aux Function; Using A Microphone - PIONEER DJ XDJ-XZ Operating Instructions Manual

– [ ]: The curve quickly rises. (When the crossfader is moved
away from the edge of [A] side, the sound is immediately output
from the [B] side.)
– [ ]: This curve is between other curves.
– [ ]: The curve slowly rises. (When the crossfader is moved
away from the edge of [A] side, the volume on the [B] side slowly
rises and the volume on the [A] side slowly descends.)

Using the AUX function

1 Switch the AUX selector switch.
– OFF: Mutes the input sound.
– LINE: Use this when connected to other than a portable device.
– PORTABLE: Use this when connected to a portable device.
2 Turn the [TRIM] knob.
Adjust the level of sound input to the [AUX IN] channel.

Using a microphone

1 Connect a microphone to the [MIC1] input terminal or [MIC2] input
terminal.
2 Set the [MIC (OFF, ON)] switch to [ON].
• The [MIC (OFF, ON)] indicator lights up.
3 Turn the [MIC1 LEVEL] knob or [MIC2 LEVEL] knob.
Adjust the volume of the sound output from the [MIC] channel.
• The sound comes out at a loud volume if the knob is turned all the way to the
right.
4 Input audio to the microphone.
Adjusting the sound quality
Turn the [MIC EQ (HI, MID, LOW)] knob of the [MIC] channel.
Part names and functions
99
En