Table of Contents
Advertisement
Wireless dimming actuator, 4-gang
For ohmic-inductive mixed load, maximum 50% proportion of ohmic load. Otherwise in-
correct calibration of the dimmer may result.
Only subject load outputs switched in parallel to up to 95%.
The minimum load of parallel switching of load outputs is 250 VA.
If the operating mode is set to HV { LED trailing edge phase control, the maximum
connected load for LED lamps increases to typ. 200 W.
Mixed load
ohmic-inductive
ohmic-capacitive
capacitive-inductive
Ohmic and HV LED
Ohmic and compact fl lamp.
Power boosters
Total length power cable per channel
Fitting width
Bus connection
Rated voltage
Current consumption
Connection, Bus
Cable length
6
Parameter list
The device parameters can be changed with the eNet server:
Device and channels
Parameters
Function
32578622
10867484
Figure 6: Connected load
Setting options, Basic setting
Light, unused
Basic setting: Light
01.10.2019
20 ... 250 VA
20 ... 250 VA
not permitted
typ. 3 ... 50 W
typ. 3 ... 50 W
See power booster instructions
144 mm / 8 module
DC 12 V SELV
device connection terminal
Explanations
Light
The channel is integrated for
the "Lighting" central function
in the eNet SMART HOME
app.
Unused
The channel is not displayed
in the eNet SMART HOME
app and is disabled for use in
the commissioning interface.
100 m
10 mA
max. 3 m
9 / 19
Advertisement
Table of Contents
