Gira 5431 00 Operating Instructions Manual page 16

Wireless dimming actuator, 4-gang
Parameters
Switch off brightness over-
shoot
Switch on brightness under-
shoot
Hotel function
Information window
In the Information window, the load can be controlled and the information about the device can
be displays.
Channel control/channel information
Display value
Current dimming value
Load state
Restraint
Operating hours
Display dimming principle
32578622 10867484
Setting options, Basic setting
On, Off
Basic setting: On
On, Off
Basic setting: Off
On, Off
Basic setting: Off
Explanations
The load can be dimmed using the slider or a
brightness value entry.
The load can be switched on or off.
Display of forced position status.
Display of the operating hours since the last
restart in the Settings window Einstellungen.
Display of the used dimming principle.
01.10.2019
Explanations
Allows automatic switch-off
according to the brightness. If
the parameter is On, then the
light controller switches off
automatically when the bright-
ness setpoint is greatly ex-
ceeded.
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
Allows automatic switch-on
according to the brightness. If
the parameter is On, then the
light controller switches on
automatically when the bright-
ness setpoint is greatly under-
shot. We recommend only us-
ing the parameter in connec-
tion with the parameter
"Switch-off on brightness over-
shoot".
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
If the hotel function is activ-
ated, the system will dim to 20
% brightness when a switch-
off command is made. Switch-
off is only possible with a
forced position command.
Note: If the minimum bright-
ness is set to greater than 20
%, then the system dims to
the set minimum brightness
when the hotel function is ac-
tivated.
16 / 19