Gira 5431 00 Operating Instructions Manual page 4

Wireless dimming actuator, 4-gang
Connecting loads to outputs
Load connection A1...A4
(1)
Operating mode switch A1...A4
(2)
Button Prog A1...A4
(3)
(4) Status LED A1...A4
(5) Switch Mod.
(6) Bus line connection
Set Mod. switch (5) to position 1.
￭
All load outputs work independently of each other.
Connect 600 Watt LED lamps or compact fluorescent lamps at most per 16 ampere circuit
breaker. When connecting transformers, observe the data of the transformer manufac-
turer.
Our dimmers take into account the different electronic characteristics of most LED lamps
found on the market. However, it cannot be guaranteed that in individual cases the de-
sired results may not be achieved.
￭ Connect loads as shown in the connection example (Figure 2)
It is possible to increase power of the individual outputs by means of power boosters.
Make selection in accordance with the dimmer and load.
32578622 10867484
Figure 2: Connection example of outputs
Figure 3: Clampable conductor cross-section
01.10.2019
4 / 19