System Board - IBM Aptiva Series Hardware Maintenance

System Board

•
Remove adapter cards.
•
Remove riser card.
•
Disconnect any cables necessary for removal.
•
Remove memory(SIMM) if applicable.
•
Remove processor.
•
Use a flat blade screw driver (you can use other instruments with the same
features), gently push the BKT hook which stabilize the Riser Card until it
loosen as shown in the following figure.
•
Press 2 hooks in the upper and bottom side to release the board out.
Figure 4- 26 Remove the System Board
Repair Information 4-31