IBM Aptiva Series Hardware Maintenance page 25

Machine type 2136 and ibm monitors type 2119 and 2120
Hide thumbs Also See for Aptiva Series:
Table of Contents

Advertisement

Keyboard port (PS/2 connector)
Mouse port (PS/2 connector)
Connectors for
PCI/ISA riser card (1x186-pin)
Input power (12-pin)
AT diskette drive (34-pin)
Two 40-pin Enhanced IDE drive channels: a primary local bus IDE
that supports two hard disk drives and a secondary Enhanced IDE
that supports a CD-ROM drive and one hard disk drive, or two hard
disk drives.
2-wire power Light-Emitting Diode (LED) cable
4-wire hard disk Light-Emitting Diode (LED) cable
2-wire power switch connector cable
3-wire power supply auxiliary control connector from power supply
to system board for Microsoft Windows 95 software shutdown
feature.
RTC lithium battery.
Processors
One of the following processors can be installed:
Pentium P54C-120 MHz internal; 66 MHz external
Pentium P54C-133 MHz internal; 66 MHz external
Pentium P54C-150 MHz internal; 60 MHz external
Pentium P54C-166 MHz internal; 66 MHz external
Pentium P54C-200 MHz internal; 66 MHz external
Pentium MMX P54C-200 MHz internal; 66 MHz external
Pentium MMX P54C-200 MHz internal; 66 MHz external
Cyrix PR150+ processor
Cyrix PR166+ processor
Diskette Drive
AT-type
3.5-in. 1.44 MB slimline diskette drive.
1-6

Advertisement

Table of Contents
loading

Table of Contents