IBM Aptiva Series Hardware Maintenance page 73

Table 2- 2 Error Symptoms List
Error Symptoms
CD-ROM drive does not
load when system is
powered on, CD-ROM
LED lights off, and the
eject button is pressed
and held.
CD-ROM drive does not
eject when system is
powered on, CD-ROM
LED lights off, and the
eject button is pressed
and held.
CD-ROM drive does not
read data files and no
error codes or
messages are
displayed.
Cannot read from Drive
E. Retry loading CD
message is displayed
with disc loaded in CD-
ROM drive.
CD-ROM drive does not
play an audio disc. But
system function works
properly and CD-ROM
drive reads data files.
Real-time clock is
inaccurate.
2-20
Action/FRU
CD-ROM drive power.
"CD-ROM Drive" on page 2-26.
CD-ROM drive
"CD-ROM Emergency-exit Option" on
page 5-16, 5-17.
CD-ROM drive power.
"CD-ROM Drive" on page 2-26.
CD-ROM drive
CD may have dirt or foreign material
on it, check with a known good disc.
CD-ROM drive.
Audio cable on CD-ROM drive is not
connected to system board properly
if music can be heard through
headphones.
Speaker power/connection/cable.
Audio-I/O card connection/cable.
CD-ROM drive.
Real-Time Clock
Ensure the information in the Date and
Time of BIOS Setup are correct.
RTC battery. See "RTC Lithium
Battery" on page 4-28.
System board