Memory(Simm) - IBM Aptiva Series Hardware Maintenance

Memory(SIMM)

Attention: Memory modules are sensitive to static discharge.
•
Remove all adapter cards.
•
Remove riser card
•
Locate the two clips that hold the memory module in place. One clip holds
the left edge of the module and the other holds the right edge.
•
At the same time, push both clips outward, away from the module. This
releases the module from the socket.
•
Lift the module out of the socket.
•
Lift the module out of the socket.
Figure 4- 19 Removing memory modules (SIMM)
4-24