IBM Aptiva Series Hardware Maintenance page 93

3. Select Settings, then select Control Panel.
4. Select the Sound icon.
5. In the Sound window, select chimes from the Names field. (To
test other adapter card software, select an action from a menu
in that software.)
011 - IS THE PREVIEW BUTTON (OR ACTION IN OTHER SOFTWARE)
SELECTABLE ON THE SCREEN (SHOWN IN BLACK AND NOT
GRAY)? (YES, READ AHEAD. NO, GO TO STEP 017)
− Select the Preview button from the Sound window.
013 - DO YOU HEAR ANY SOUND FROM THE SYSTEM? (YES,
READ AHEAD. NO, GO TO STEP 014.)
− The system is working normally.
− Click Cancel to close the dialog box. Exit Microsoft Windows 95.
− If the symptom remains or has changed, go to "Index of Symptoms,
Messages, Error Codes, or Beeps" on page 2-7.
− End
014 -
− Make sure the volume control on the sound adapter card (if any) is
not turned low.
− Make sure the speakers are not damaged. If damaged, replace the
speakers.
− Make sure the speaker sound cable is plugged into the Audio-I/O
card Speak-out jack. See "Audio-I/O Card Layout" on page 5-9.
− Repeat the test in Step 010 on page 2-39.
015 - DOES THE SYMPTOM CHANGE? (YES, READ AHEAD. NO,
GO TO STEP 016)
− If you hear sound from the speakers, the system is working normally.
− If you suspect another problem, go to "Index of Symptoms,
Messages, Error Codes, or Beeps" on page 2-7.
− End
016 -
− − Replace the speakers or Audio-I/O card or system board.
− − End
2-40