Hanseatic WQP12-7709H User Manual page 64

Page EN-30 Troubleshooting table
Problem
8 The dishwasher can
be switched on/off,
but not cannot be
operated.
9 The dishes are not
completely clean.
10 The "Rapid" pro-
gramme indicator
flashes rapidly.
The "Glass" pro-
gramme indicator
flashes rapidly.
Possible cause
The dishwasher can
only be operated when
the door is closed.
There are food scraps
which are encrusted
onto the dishes.
The dishes have not
been stacked optimally.
You have selected the
incorrect dishwashing
programme.
The dishwasher de-
tergent is incorrectly
dosed.
The water pressure is
too low.
The spraying arm can
not rotate unhindered.
The nozzles on the
spraying arm are
blocked/calcified.
The "half load" function
is activated. The in-
dicator lights up.
Water intake is too low. Open the tap completely. Remove the
Water overflow.
Solution
Close the door.
Soak dirty dishes prior to washing the dish-
es.
Stack the dishes in such a way that all
parts can be reached by the water jets
see „Loading the dishwasher" on page
EN-14).
Select the correct dishwashing pro-
gramme see „Dishwasher programme
table" on page EN-19).
Use the correct dosage of dishwasher
detergent see „Dishwasher programme
table" on page EN-19).
Turn the water tap on completely.
Ensure that no dishes are impeding the
motion of the spraying arm.
Clean the nozzles see „Cleaning the
spraying arm" on page EN-21).
Press the "Half load" button.
The indicator goes out.
kink in the inlet hose. Increase water pres-
sure.
Find the gap in the seal (or have some-
one find it) and repair the leak (or have it
repaired).