Table of Contents
Advertisement
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Dimensions:
Power:
Backup Battery:
DC Current drain:
Radio fault output:
Input triggering levels:
RF power output:
Frequency band:
Channel separation:
Receiver sensitivity:
Operating temp:
Storage temp:
Humidity:
Altitude:
Antenna:
6.5" x 4.0" x 1.5" without antenna
Panel auxiliary power output, 9.6 - 13.8VDC
ADEMCO K4362
100mA maximum in Current Limit Mode, 400mA maximum if current limit
disabled and battery low or bad.
NOTE: When the 7720P is plugged in, an additional 100mA is drawn from
the power supply.
Open collector
Voltage, ground, or contacts can trigger 2K EOL supervised Zones 3 – 7
Zones 1 and 2, pulsed.
600mW
833-835MHz Transmit
878-880MHz Receive
30kHz
-115dBm
-30° to +60° Celsius (UL Listed for 0 to 49° C)
-40° to +70° Celsius
0 to 90% relative humidity, noncondensing
to 10,000 ft. operating, to 40,000 ft. storage
ADEMCO Cellular Antenna K4193 (included)
S E C T I O N
Specifications
1 0
10–1
Advertisement
Table of Contents
