SOLTEK SL-61A User's Manual & Technical Reference page 43

IR IRQ Select Choose 3, 4, 10 (default), or 11.
Note: Choose IRQ3/4 maybe conflict
with COM1/COM2, and IRQ11
may conflict with USB
controller.
FIR Mode Use Choose Disabled (default), 0, 1, or 3.
DMA
Note: Settings 0, 1, or 3 may be
conflict with other devices (such
as sound card, ECP).
Onboard Parallel Choose the printer I/O address:
Port 378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5
Parallel Port Mode Choose SPP (default), ECP + EPP
EPP, or ECP mode. The mode
depends on your external device
that connects to this port.
ECP Mode Use Choose DMA3 (default) or DMA1.
DMA Most sound cards use DMA1.
Check with your sound card
configuration to make sure that
there is no conflict with this
function.
*: This option will not be displayed
unless the EPP/ECP function is
selected..
EPP Mode Select Choose EPP1.7 (default) or EPP1.9.
EPP1.9 supports hardware
handshake. This setting is
dependent on your EPP device.
Note: The above 2 options will not be
displayed unless the EPP/ECP
function is selected.
Award BIOS Setup 39