J1 Pin12, 13: Pwr Switch; Sleep Switch (J1 Pin14, 15); Speaker Connector (J2 Pin1Ð4); Reset Switch (J2 Pin5, 6) - SOLTEK SL-61A User's Manual & Technical Reference

J1 pin12, 13: PWR Switch

Power Switch: Toggle this pin for turnning on/off of the
power supply (for ATX power only).

SLEEP Switch (J1 pin14, 15)

Toggle this jumper forces the system to sleep and the system
wonÕt wake up until the hardware event is coming. (The
BIOS Power Management setting muse be Enabled.)
Speaker Connector (J2 pin1–4)
The speaker connector is a 4-pin connector for connecting
the system and the speaker. (See the following drawing for
jumper position.)

Reset Switch (J2 pin5, 6)

The system board has a 2-pin connector for rebooting your
computer without having to turn off your power switch.
This prolongs the life of the systemÕs power supply.
Power LED and Keylock Switch (J2 pin8–12)
The keylock switch is a 5-pin connector for locking the
keyboard for security purposes. (See the following drawing
for jumper position, and pin1~3 is connected to power LED
and pin 4~5 is connected to keylock switch.)

Turbo LED (J2 pin14, 15)

Connect the caseÕs turbo LED to this connector.
Hardware Installation 19