SOLTEK SL-61A User's Manual & Technical Reference page 42

Onboard FDC Choose Enabled (default) or
Disabled. Choose Disabled when
Controller
you use an ISA card with FDD
function, or , choose Enabled to use
the onboard FDD connector.
Onboard Serial Choose 3F8/IRQ4 (default),
Port 1 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, or
Disabled.
Do no set port 1 & 2 to the same
value except for Disabled.
Onboard Serial Choose 3F8/IRQ4 , 2F8/IRQ3
Port 2 (default), 3E8/IRQ4, 2E8/IRQ3, or
Disabled.
Onboard IR Enabled: Enables the onboard IR
Controller
Disabled (default): Disables the
IR Address Select Choose 3F8H, 2F8H, 3E8H, 2E8H
(default), 3E0H, or 2E0H.
Note: 3E8/2E8/3E0/2E0H may conflict
IR Mode Choose IrDA (default), ASKIR, FIR,
or CIR.
IR Transmition Enabled: Enabled delay when
Delay
Disabled (default): Disabled delay
38
function.
onboard IR function.
with COM3/COM4 I/O port.
Change the setting when internal
modem/fax card is installed.
transfers data.
when transfers data.