SOLTEK SL-61A User's Manual & Technical Reference page 34

DRAM RAS# Use the default setting. This option
allows you to determine the number
Precharge Time
of the CPU clocks allocated for the
RAS to accumulate/charge it before
the DRAM is refreshed.
RAS# to CAS# Use the default setting. This setup
Delay option allows you to determine the
delay time in completing the
transition from RAS to CAS.
DRAM Read Burst Use the default setting. Burst
(B/E/F) read/write requests are generated
DRAM Write Burst by the CPU in four separate parts.
(B/E/F) The 1st part provides the location
within the DRAM where the read or
write is to take place while the
remaining three parts provide the
actual data. The lower the timing
number is, the faster the system
memory will be addressed.
ISA Bus Clock Use the default setting.
DRAM Refresh Use the default setting.
Queue
DRAM RAS Only Use the default setting.
Refresh
DRAM Use the default setting.
ECC/PARITY
Select
Fast Dram Refresh Use the default setting.
Read-Around- Use the default setting.
Write
PCI Burst Write Use the default setting.
Combine
30