Initial Controller Setup - Promatic WDC10B Manual

INITIAL CONTROLLER SETUP

WDC heating controllers are equipped with an innovative solution which enables the setup of
controller in just three or four easy steps.
When the controller is connected to the network for the first time, the display first shows the
program version and company logo and then the first step of the procedure for controller
settings is presented.
STEP 1 - SET LANGUAGE
Use buttons and
Confirm the selected language by pressing
If you do not find the desired language in the first screen, move to the next screen
with
to select the desired language.
The controller requires a confirmation of language selec-
tion with the
In case you chose the wrong language, return to the lan-
guage selection with the
.
.
button.
button.
9 User manual