Graphic Lcd Display - Promatic WDC10B Manual

GRAPHIC LCD DISPLAY

On the LCD display we can look up all the important data for the controller operation.
DESCRIPTION AND PRESENTATION OF THE BASIC SCREEN:
Heating circuit.
Operation mode.
Review of
Time and
temperatures,
date.
protection
functions and
other data.
Review of data on the screen:
Operation mode and user functions appear separately for each circuit on the upper third of the
screen. To switch between heating circuits and the screen with the hydraulic scheme review
use the button.
Temperatures, active outputs, protection functions and other data appear in the middle section
of the screen. To review temperatures and other data, use buttons
The number of sensors and other data displayed on the screen depends on the selected hy-
draulic scheme and controller settings.
If you wish to retrieve the desired data after using the keyboard, look for the
data with buttons
for 2 seconds.
If you press the
from a single line review into a double line review or vice versa. In the two-line
temperature review, the measured temperature appears in the first line, and the
desired or the calculated temperature appears in the second line.
User manual
User functions.
Room unit.
Messages
and war-
nings.
and
button for 2 seconds, the temperature review will change
Status of the controller's control outputs.
, then confirm it by pressing the
12
Review of
measured
temperatu-
res.
and .
button