CONTROLLER INSTALLATION
The controller must be installed in an outdoor and dry area. Avoid immediate proximity of
strong electromagnetic field sources. The controller can be installed either directly onto a
wall or onto an installation batten.
INSTALLATION ONTO A WALL
The WDC controller is usually installed in the boiler room. The installation onto a wall is con-
ducted as follows:
1. In the installation spot, drill 2 holes with the diameter of 6 mm and depth of approximately
35 mm. The centres of the holes must be vertically 120 mm apart.
Place wall inserts into the holes. Screw the screw into the upper wall insert so that the
screw head is approximately 4 mm away from the wall.
Installation manual
INSTALLATION MANUAL
68
1