FACTORY SETTINGS
The menu contains the tools to help you set the controller. The controller can be reset to
desired settings by selecting:
RESET OF CONTROLLER PARAMETERS
Resets all parameter settings P1, P2, P3, P4, P5, P6, S1 (except S1.1), S2, S3, S4, S5, S6 and F
to factory set values.
RESET OF TIME PROGRAMS
Deletes the set time programs and retrieves factory set time programs.
RESET OF CONTROLLER AND RE-START OF THE FIRST SETTING
Retrieves all parameters to factory set values and restarts the controller in the first set up.
SAVE USER SETTINGS
Saves all controller settings as a safety copy.
LOAD USER SETTINGS
Uploads all controller settings from the safety copy. If a safety copy doesn't exist, this command
cannot be realised.
Before performing the commands stated above, the con-
troller requires a confirmation of the selected command.
51
Service setting manual