Table of Contents
Advertisement
Setting the time before the door
alarm
is triggered
The appliance has a door alarm. If a
door is open for a longer period of time
an alarm will sound (unless this has
been switched off: see "Setting the
volume/Switching alarms and audible
tones on/off") and
display (see "Temperature and door
alarm – Door alarm").
You can set the time before the door
alarm
sounds with the segment bar:
The time can be set in 30-second
increments, starting with 30 seconds
(level 1 = 1 filled-in segment) up to a
maximum of 3 minutes 30 seconds
(level 7 = 7 filled-in segments).
will light up in the
Selecting further settings
Switching the keypad tone
on/off
Each time a selectable field in the
display is touched, a keypad tone
sounds. You can switch this tone on
or off
.
Setting the volume/Switching alarms
and audible tones on/off
You can set the volume of the alarms
and audible tones in the segment bar:
If all segments are filled in, the
maximum volume is set.
If no segments are filled in, the alarms
and audible tones are switched off.
appears.
You will hear the volume change as it is
adjusted.
Alarms and audible tones for
temperature alarms, error messages,
interruptions to the power supply or a
set minute minder cannot be switched
off.
/
39
Advertisement
Table of Contents
